Casma/Speedy KS-3000 Non-Hold Open Floor Closer

Casma - Casma/Speedy KS-3000 Non-Hold Open Floor Closer

• *Closer Body Only
• This is a double acting door closer, particularly suited to
installations with DIN right or DIN left and in special situations where the
cement box must be placed completely outside the jamb.
• Highly reliable mechanics. Yield greater than 75%. Lasts more than a decade.
• Can be regulated inside the cement case, above all longitudinally to consent
use even where the hinge axes are different.
• Quick and effective fixing in the cement case with just two screws,
which control four tempered steel lateral blades.
• One single valve programs the desired closing speed from 115 ° to 0° ca.
An additional valve enables and regulates the latch speed from 15° to 0° ca.
• Thermo constancy” is standard equipment.
• The cover is fixed to a small counterbalanced lever (movable, self-centering) with two screws.
With this innovative fixing the cover is always perfectly aligned with the door.
• The rear cover (supplied with the cover) is inserted and fixed with a screw,
once the door and cover are installed. The rear cover has a thin blade
appendix that can easily be cut and shaped if a jamb requires it.
If this has been forgotten, it does not imply dismantling the door.
• One single strength (factory preset) perfectly suits 90% of doors.
One additional strength nearly completely covers the remaining 10% of doors.

Price: $375.00

Quantity:

Casma/Speedy SM 25 90°-105° Hold Open Floor Closer

Casma - Casma/Speedy SM 25 90°-105° Hold Open Floor Closer

• *Closer Body Only
• Additional hold-open zone from 115° and 175°
• Applicable on left-hand, right-hand or double-acting doors
• Floorcheck is hermetically sealed
• The entire mechanism us enclosed in a cast-iron block.
• Strong closing force preset in the factory
• Decreasing opening stress after the first 20°
• Over 70% average operating efficiency, due to careful maching, tight tollerances (up to 0.02 mm) and severe quality control
• Floorchecks for very humid or corrosive environments
• Floorchecks with "back stop" at 90° or 105°
• Floorchecks with mechanical "back check preset in factory
• Floorchecks with interchangeable spindle head
• Quick and effective fixing in the cement case with just four screws.

Choose Degree of Opening:

Price: $370.00

Quantity:

Casma/Speedy SM 25 Non-Hold Open Floor Closer

Casma - Casma/Speedy SM 25 Non-Hold Open Floor Closer

• *Closer Body Only
• Applicable on left-hand, right-hand or double-acting doors
• Floorcheck is hermetically sealed
• The entire mechanism us enclosed in a cast-iron block.
• Strong closing force preset in the factory
• Decreasing opening stress after the first 20°
• Over 70% average operating efficiency, due to careful maching, tight tollerances (up to 0.02 mm) and severe quality control
• Floorchecks for very humid or corrosive environments
• Floorchecks with "back stop" at 90° or 105°
• Floorchecks with mechanical "back check preset in factory
• Floorchecks with interchangeable spindle head
• Quick and effective fixing in the cement case with just four screws.

Price: $370.00

Quantity:

Casma - Casma/Speedy KS-3000 Non-Hold Open Floor Closer

Casma - Casma/Speedy KS-3000 Cement Case Only

Casma - Casma/Speedy SM 25 90°-105° Hold Open Floor Closer

Casma - Casma/Speedy SM 25 Non-Hold Open Floor Closer

Casma - Casma/Speedy SM 25 Cement Case Only

Casma - Casma/Speedy 25C. Finish Floor Cover Plate